translation from frensh ...

[moostaflow]

salam ....
voila en ce moment j fait un stage de fin d'étude et on ma demander de faire un abstract en anglais ....je l'ai faite en francais mais j'ai du mal a la faire en anglais donc .....je vous demande de l'aide lah yer7em lwalidin....merci.


le resumé








C’est au sein du service qualité de TENCATE Geosynthetics, une entreprise qui conçoit, fabrique et vend des géotextiles et les produits apparentés, que j’ai réalisé mon stage de 10 semaine avec pour maître de stage, Monsieur E.OLIVIER, Responsable d’Assurance Qualité. Ce service est rattaché à la Direction de Développement et des Applications (DDA).

J’avais pour mission d’effectuer des essais par sondage sur des échantillons prélevés depuis le début de l’année 2008 afin de déceler toute non-conformité dans leurs valeurs .je devais faire d’abord des essais mécaniques : essai de masse surfacique, essai d’épaisseur, essai de perforation dynamique dit "chute de cône", essai de poinçonnement statique dit "essai CBR", essai de poinçonnement pyramidal et essai de traction. Ensuite, des essais hydrauliques : essai de perméabilité et essai d’ouverture de filtration(OF).

Apres chaque manipulation (essai), je devais comparer mes résultats avec le tableau ASQUAL, et signaler toutes valeurs qui ne rentrent pas dans l’intervalle de tolérance de l’essai.

[moostaflow]

ta wahed ma 7achaha lia daba......walou tgoul chi 7ad za3ma...

[zbougz]

	Citation:			Posté par moostaflow
	ta wahed ma 7achaha lia daba......walou tgoul chi 7ad za3ma...

chouf m3a dak rass lmodem dyal mr_x rah khatir f negliza

[SuZiTaToh]

ga3 msheft had sujet ana ili n9dar ngolik o bla kdoob ana na3erf nsa7e7 l2ghlatt 2ama ntraduisi lma3na manti9shhh f rassi

donc Mr_x ytraduisi o ana nsa7e7

[ChA3nOuNa]

can you correct more this essay please?

It is within the service quality of TENCATE Geosynthetics, a company that designs, manufactures and sells geotextiles and related products, I realized that my 10-week internship with the supervisor, Mr. E. OLIVIER, Head of 'Quality Assurance. This service is attached to the Directorate of Development and Applications (DDA).

I had the mandate to carry out random tests on samples taken since early 2008 in order to detect any non-compliance in their values. I had to do first of all mechanical tests: test mass surface Test thick, perforation test dynamic known as "fall cone", punching static test called "test CBR" Test punching pyramidal and tensile test. Then, hydraulic tests: permeability test and test opening filtration (OF).

After each manipulation (test), I had to compare my results with the table ASQUAL, and report all values that do not fall within the tolerance of the test.

[mr_anonymous]

hada dertou b traducteur en ligne, ca doit te donner des idées deja


It is within the service quality of TENCATE Geosynthetics, a company
which conceives, manufactures and sells the geotextile ones and the
connected products, that I carried out my training course of 10 week
with for Master of training course, Mr E.OLIVIER, Responsable for
Quality assurance. This service is attached to the Management of
Development and Applications (DDA).

I had the role of carrying out tests by survey on samples taken since
the beginning of the year 2008 in order to detect any nonconformity in
their je values were to carry out mechanical tests initially: mass
test surface, test thickness, dynamic test of perforation said "falls
of cone", test of punching static called "test CBR", test of pyramidal
punching and tensile test. Then, of the hydraulic tests: test
permeability and test of opening of filtration(OF).

After each handling (test), I was to compare my results with table
ASQUAL, and to announce all values which do not re-enter in the
interval of tolerance of the test.

[ChA3nOuNa]

	Citation:			Posté par mr_anonymous
	hada dertou b traducteur en ligne, ca doit te donner des idées deja It is within the service quality of TENCATE Geosynthetics, a company which conceives, manufactures and sells the geotextile ones and the connected products, that I carried out my training course of 10 week with for Master of training course, Mr E.OLIVIER, Responsable for Quality assurance. This service is attached to the Management of Development and Applications (DDA). I had the role of carrying out tests by survey on samples taken since the beginning of the year 2008 in order to detect any nonconformity in their je values were to carry out mechanical tests initially: mass test surface, test thickness, dynamic test of perforation said "falls of cone", test of punching static called "test CBR", test of pyramidal punching and tensile test. Then, of the hydraulic tests: test permeability and test of opening of filtration(OF). After each handling (test), I was to compare my results with table ASQUAL, and to announce all values which do not re-enter in the interval of tolerance of the test.

dima mzahamny alah yaster, ani deja dartlou la traduction automatique

[alexander]

	Citation:			Posté par lamyae201
	It is within the service quality of TENCATE Geosynthetics, a company that designs, manufactures and sells geotextiles and related products, I realized that (the oposite, that i realized) my 10-week internship with the supervisor, Mr. E. OLIVIER, Head of 'Quality Assurance. This service is attached to the Directorate of Development and Applications (DDA). I had the mandate to carry out random tests on samples taken since early 2008 in order to detect any non-compliance in their values. I had to do first of all mechanical tests: test mass surface Test thick, perforation test dynamic known as "fall cone", punching static test called "test CBR" Test punching pyramidal and tensile test. Then, hydraulic tests: permeability test and test opening filtration (OF). After each manipulation (test), I had to compare my results with the table ASQUAL, and report all values that do not fall within the tolerance of the test.

and i'm still not feeling confortable with some stuf, i think something is wrong in the way you organized the parts concerning the tests.

	Citation:			Posté par mr_anonymous
	It is within the service quality of TENCATE Geosynthetics, a company which conceives, manufactures and sells the geotextile ones and the connected products, (just remove it) that I carried out my training course of 10 week with for Master of training course, Mr E.OLIVIER, Responsable (responsible) for Quality assurance. This service is attached to the Management of Development and Applications (DDA). I had the role of carrying out tests by survey on samples taken since the beginning of the year 2008 in order to detect any nonconformity in their je (what's this ) values were to ( it should be as lamyae did : i had to) carry out mechanical tests initially: mass test surface, test thickness, dynamic test of perforation said "falls of cone", test of punching static called "test CBR", test of pyramidal punching and tensile test. Then, of the hydraulic tests: test permeability and test of opening of filtration(OF). (much better than lamyae's one) After each handling (test), I was (I had ) to compare my results with table ASQUAL, and to announce all values which do not re-enter in the interval of tolerance of the test.

that's what i think.

N.B: it's French, not frensh (mistake on the title)

[SuZiTaToh]

Voila la correction Lamaye, dyal Ysf mazal madartha mai je pense hadi ca marche

It is within the service quality of TENCATE Geosynthetics, a company that designs, manufactures and sells geotextiles and related products, where I achieved my 10-week internship with the supervisor, Mr. E. OLIVIER, Head of 'Quality Assurance. This service is attached to the Directorate of Development and Applications (DDA).

I had the duty to carry out a survey tests on samples taken since early 2008 in order to detect any non-compliance in their values. First of all, I had to do mechanical tests: mass surface test, thickness test, perforation test, dynamic test known as "fall cone", punching static test called "test CBR" punching pyramidal test and tensile test. Then, hydraulic tests: permeability test and opening filtration (OF) test.

After each manipulation (test), I had to compare my results to the ASQUAL table, and report all values that do not fall within the tolerance of the test.


Les mots surlignés tamakk fin corigit les erreurs

o les mots en rouge, ça se dit pas et je ne sais pas avec koi je peux le remplacer alors cherchez f shi dictionnaire scientifique


Salamm

[alexander]

	Citation:			Posté par SuZiTa
	It is within the service quality of TENCATE Geosynthetics, a company, that designs manufactures and sells geotextiles and related products, where I achieved my 10-week internship with the supervisor, Mr. E. OLIVIER, Head of 'Quality Assurance. This service is attached to the Directorate of Development and Applications (DDA). I had the duty to carry out a survey tests on samples taken since early 2008 in order to detect any non-compliance in their values. First of all, I had to do mechanical tests: mass surface test, thickness test, perforation test, dynamic test known as "fall cone", punching static test called "test CBR" punching pyramidal test and tensile test. Then, hydraulic tests: permeability test and opening filtration (OF) test. After each manipulation (test), I had to compare my results to the ASQUAL table, and report all values that do not fall within the tolerance of the test. o les mots en rouge, ça se dit pas et je ne sais pas avec koi je peux le remplacer alors cherchez f shi dictionnaire scientifique

me too i didn't find some words. i m not familiar with these terms.

for the first underlined words, i desagree with the coma that you used. i think it shouldn't be a coma after "company"!!!

except this, tbarkellah 3lik.